## What is the common length of a reinforcing bar?

Pag-asa Steel rebars come in the following commercial lengths: 6.0m, 7.5m, 9.0m, 10.5m, and 12.0 m. Special lengths of 13.5 and 15.0 meters may be produced via special order. The cut length of a rebar should not be shorter than the specified commercial lengths according to the PNS 49:2020 standards.

## What are the sizes of reinforcement?

Bar sizes & weights

Bar Size | Dims (Max O/A) | Mass (Kg per m) |
---|---|---|

12mm (T12) | 14mm | 0.888 |

16mm (T16) | 19mm | 1.579 |

20mm (T20) | 23mm | 2.466 |

25mm (T25) | 29mm | 3.854 |

**What is T10 rebar?**

T10 Rebar – 10mm High Tensile Reinforcement Bar.

**How long is 16 mm steel bar?**

16 mm steel bar weight:- 16 mm steel bar supplied in U bent or straight rods, length of 16 mm steel bar is 40 feet or 12meter and 16 mm steel bar weight is 1.580 kgs/m, 0.480 kgs/foot, 18.96 kgs/piece and 56.889 kgs/bundle.

### How long is a length of rebar?

Typical lengths are 20, 30, 40 and 60 foot, but custom lengths are available. ASTM A615 is produced in grades 40, 60, 75, 80, 100. ASTM A706 is produced in grades 60, 80.

### What is R10 rebar?

Plain round bar, is as the name implies plain, and lacks the ribs that give improved concrete bonding. Plain bar is often denoted R10, R12 etc, and is used to make reinforcing components such as links and stirrups.

**How do you calculate the length of a reinforcement bar?**

Example of Beam Reinforcement Calculation:

- Length of B1 = clear distance between walls + 2 x width of walls – 2 x bar cover + 2 x bend length.
- Length of bar B2: A + B + C = 4000 + 2 x 230 – 2 x 40 + (1.414xH – H)
- B2 = 4000 + 2 x 230 – 2 x 40 + (1.414×334 – 334) = 4518.3 = 4520mm.

**How do you calculate the length of a steel bar?**

Consider a steel bar with diameter D and Length is L. Here, D is steel diameter in mm, and the density of steel is in kg/m3….

Dia of Steel Bar | Length | Unit Weight |
---|---|---|

16 mm | 1 m | 1.58 kg/m |

20 mm | 1 m | 2.46 kg/m |

25 mm | 1 m | 3.87 kg/m |

32 mm | 1 m | 6.32 kg/m |

#### How do you measure the length of a reinforcement bar?

#### What are the properties of standard reinforcing bars?

Bar Identification Table 7.1 – Properties of Standard Reinforcing Bars ASTM Standard Reinforcing Bars Nominal Dimensions – Round Sections Inch-Pound Bar Size Metric Bar Size Nominal Weight or Mass Lb./Ft. (kg/m) Diameter In. (mm) Cross Sectional Area In.2(mm2) Perimeter In.

**How to check for proper spacing of rebar in reinforcement?**

Check for proper spacing of bars Verify with plan requirements reinforcement spacing should be within + or – 1/2 inch of plan location Uneven distribution of rebar can cause concrete cracking Placement of Reinforcing Steel

**What are the requirements for reinforcing steel placement?**

Placement of Reinforcing Steel Inspections Epoxy Coated Reinforcement repair not necessary for areas < 1/4” square or where sum of damage per 1 foot of bar is < 2% of bar surface bars with >2% of surface damage shall be rejected sheared ends are normal problem areas Welding Reinforcing Steel Not normally welded

## What is the BMA code for reinforcing bars?

• Reinforcing Bar Specifications • Mechanical Splices • Specifications for Tolerances BMA Engineering, Inc. – 5000 60 Title 0401 – E120 – Civil Codes and Inspection – 053 – Reinforcing Bars, Reinforcing Details and Tolerances.