Q&A

Can APEX control Kessil lights?

Cairon Davison

Can APEX control Kessil lights?

The Kessil LED lights which will be directly controlled by the Apex must be connected over Wi-Fi to the same network as the Apex. Kessil A360X Tuna Blue and Tuna Sun lights equipped with a WiFi Dongle may be directly controlled by the Apex.

How to reset Kessil WiFi Dongle?

Factory reset the WiFi Dongle Press the Reset Button (B) for more than 10 seconds to reset the WiFi Dongle. The Status Indicator (A) will blink red light. User’s settings will be deleted. The Status Indicator (A) will change to solid orange after booting.

How do I connect to Apex local?

If you don’t know the ip address, you can just type apex. local in your browser to access apex local (unless you’re on android then you need to use peafinder). If you don’t know the ip address, you can just type apex. local in your browser to access apex local (unless you’re on android then you need to use peafinder).

How do I set up Kessil AP9X?

Set up WiFi

  1. Set up WiFi. 1 AP9X Button.
  2. 1 Through Wireless Router. 2 Connect Directly Via WiFi.
  3. Scan QR Code. 1 Back to Step 1 – Power.
  4. Through Wireless Router. 1 Back to Step 1 – Power.
  5. 1 Done Button. Complete the Set up Wi-Fi connection.
  6. Quick Reload. Quick reload if the Dongle has been connected to your router or other devices.

What is Apex IP address?

You can find your Apex IP address by going into System>Net Setup>IP Address.

How do I connect my Kessil AP9X to WiFi?

Connect Directly Via WiFi

  1. Done Button. Complete the Set up Wi-Fi connection.
  2. Set up Additional AP9X Button. Continue to set up next AP9X.
  3. Set up Additional Dongle Button.

How do I make my apex Classic WiFi?

First check your wireless connection between computer ,tablet, phone and your wifi extender and confirm connection. Disconect your extender from Apex and connect Apex hardwired to router. Once that connection is confirmed (which also clears any corruption in Apex) then reconnect your wifi extender to Apex.

How do I find my apex IP address?

To find your Apex IP address you use the display module.

  1. Press the center button on your display module to access the Main Menu.
  2. Go to Main Menu> System> Net Setup> IP Address.
  3. There is your IP Address.
  4. Now you know the IP Address to access your Classic Dashboard anytime.