How do I turn on my Motorola Bluetooth earpiece?

To turn your headset on, open the headset boom. The indicator light flashes blue (if connected with a device) or is steadilly lit (if ready to be paired). To turn your headset off, close the headset boom. The indicator light will turn off.

How do you set up a Bluetooth headset?

How to Connect Bluetooth Headphones to Android Phone

1. First Open Settings.
2. Next, tap Connections.
3. Then tap Bluetooth.
4. Then tap Scan at the top-right corner of your screen.
5. Next, press and hold the power button on your headphones.
6. Finally, find your headphones and tap them.

How do I know when my Motorola earbuds are charged?

To charge the Bluetooth headset:

1. Plug the Motorola charger into the end of the headset.
2. The indicator light will turn on when the battery is charging.
3. When the headset’s battery is fully charged (about 2-3 hours), the indicator light will turn off.
4. Unplug the charger from the headset.

How do I pair my Motorola earphones to my phone?

Main Steps:

1. On the phone, touch Apps , then touch Settings.
2. Under Wireless & Networks, turn Bluetooth on .
3. Touch Bluetooth to scan for available Bluetooth devices.
4. Select Motorola Buds in the list of discovered devices.
5. Enter the passkey or pair code: 0000 or 1234.

How do I connect my Motorola Bluetooth headset to my laptop?

1. Turn on your Bluetooth accessory and make it discoverable.
2. On your PC, select Start > Settings > Devices > Bluetooth & other devices.
3. Select Add Bluetooth or other device > Bluetooth.
4. Choose the device and follow additional instructions if they appear, then select Done.

How do I turn on my Motorola H500 Bluetooth headset?

on the reverse side of this guide to complete initial setup of your H500. To turn your headset on, press and hold the Call button until the indicator light flashes. Then, release the button. Note: Headset may take up to 4 to 5 seconds to turn on.

How do you connect a wireless Bluetooth headset?

Tap the headphones listed. On an Android device, pull down the shade from the top of the phone and long-press the Bluetooth icon. It’ll bring you right to the Bluetooth menu where you can turn it on and then search for devices. Tap the name of the headphones you’re trying to pair.

How do you know if my wireless headphones is fully charged?

What is this? For most wireless headphones, the LED indicator will start blinking red when the battery level is low. When the headphone is plugged into a USB power source for charging, the red LED indicator stays lit. After the wireless headphone is fully charged, a trigger will be sent to the headphone.

How do you charge a Bluetooth headset?

To charge the Bluetooth headset: 1. Plug the Motorola charger into the end of the headset. 2. The indicator light will turn on when the battery is charging. It may take up to 1 minute for the light to turn on. 3. When the headset’s battery is fully charged (about 2-3 hours), the indicator light will turn off. 4. Unplug the charger from the headset.

What to look for in a Bluetooth headset?

Bluetooth headsets come in all shapes and sizes. The “Activity” column indicates what you are most likely doing when talking on the phone. And that can help you figure out which the right fit for you. If you are often moving around, then look for an in-ear headset with an ear hook or something with silicone rubber tips.

How do you pair a Bluetooth headset?

To pair your wireless headset with a Bluetooth device: Set the slider switch to the Bluetooth icon. Slide the track switch to “Next” and hold, and press and hold the “Volume up” button at the same time, until the link LED indicator blinks rapidly.NOTE: For initial Bluetooth setup, your headset will automatically be in pairing mode.

How to pair a Motorola N136 Bluetooth headset?

How to Pair a Motorola N136 Bluetooth Headset Insert the tip of the included charger into the headset so that the release button faces the same direction as the speaker. Turn on your phone’s Bluetooth, if necessary. For a Motorola phone, go to “Settings” and select the “Connections” option. Unplug the headset from the charger.