How do I setup my Nikon SB-600?

How To Setup Nikon SB-600 Flash To Work In Commander Mode

1. On the SB-600, press the ZOOM and “-” buttons simultaneously for 2 seconds to display the Custom Settings mode.
2. Press the ZOOM or MODE button to select wireless mode ON.
3. To set the group and channel, press the ZOOM and “-” buttons simultaneously for 2 seconds.

Does Nikon sb600 have TTL?

Major Features of the Nikon SB-600 Supports i-TTL (for automatic balanced Fill-Flash), D-TTL, TTL, Manual. Easy-to-view LCD with 6 simple-to-understand backlit buttons.

How do I reset my Nikon Speedlight SB 600?

One good way to remember how to reset the flash is the word “Reset” printed on the back with lines linking the word to the Mode and Power buttons. You hold down those two buttons at the same time for a couple seconds as Mac says above.

How do I reset my Nikon SB 600?

Will the SB-600 work with a Nikon D700?

If you use the Commander mode of the D700 to trigger the SB-600, the SB-600 can trigger the optical adapter on the old flash to give you 2 remote flash sources.

How to use SB-600 flash unit remotely to control the camera?

Now you are all set to use SB-600 flash unit remotely to be controlled by your camera’s built-in flash unit. But please remember to pop up the camera’s built-in flash so that it can send the signal and the exposure information to the external unit, SB-600. Otherwise the setup won’t work.

Do I need an optical slave to trigger the SB-600?

If you are using only the SB-600 Speedlight and a D700 camera, I’m not sure why you would want to use an optical slave to trigger the SB600 unless your D700 built-in flash is not working. Basic optical slave capability and much more is already built into your camera and speedlight combo by Nikon.

How do I activate wireless remote mode on the SB-600?

1. On the SB-600, press the ZOOM and “-” buttons simultaneously for 2 seconds to display the Custom Settings mode. You will see OFF displayed by default. 2. Press the ZOOM or MODE button to select wireless mode ON. Now you have activated wireless remote mode. Next step is to set the Channel and Group as per your camera settings.