How do you perform a crankshaft position relearn?

Slowly accelerate the engine to 4000 RPM (or indicated RPM for your vehicle). Hold RPM until engine speed drops back toward idle. Release throttle immediately once procedure is learned! Once the variation values are learned, the ECC will return engine control to the driver.

How do I fix code P0315?

The most common repairs to address the P0315 code are as follows:

1. Repair or replace wiring harness around crankshaft position sensor.
2. Repair or replace crankshaft position sensor.
3. Repair or replace crankshaft or related components.
4. Repair or replace timing belt.
5. Repair or replace powertrain control module.

What scanner will relearn crankshaft position sensor?

FOXWELL NT510 GM
The FOXWELL NT510 GM scanner will relearn the crankshaft position sensor on a 2009 chevy cobalt.

How do I relearn my crankshaft position sensor?

to perform the relearn, proceed as follows:

1. Set the parking brake and block the drive wheels.
2. Start the engine and make sure that the engine coolant temperature is at least 158 degrees F.
3. Turn the engine off for at least 10 seconds.
4. Select the crankshaft position variation learn procedure (CASE Learn)on your scanner.

What does trouble code P0315 mean?

OBD-II Code P0315 is defined as a Crankshaft Position System Variation not Learned. The Crankshaft Position Sensor measures the exact rotational speed and position of the crankshaft. This provides a critical data signal used by the engine control module (PCM) to control Ignition Spark Timing and Fuel Delivery.

What scan tool can relearn?

Autel MaxiTPMS TS501 TPMS Automotive Scan Tool with Relearn Capabilities. If you’re looking for an automotive scan tool with relearn capabilities, then probably you’ve got the right one. This device has a specialty in activating OEM/Universal TPMS sensors, TPMS reset, and relearn capabilities.

What does the p0315 code on a Chevrolet mean?

| What are P0315 CHEVROLET code possible symptoms? The crankshaft position (CKP) system variation learn feature is used to calculate reference period errors caused by slight tolerance variations in the crankshaft, and the CKP sensor.

How much does it cost to fix a p0315 code?

Most auto repair shops charge between $75 and $150 per hour. | What are P0315 CHEVROLET code possible symptoms? The crankshaft position (CKP) system variation learn feature is used to calculate reference period errors caused by slight tolerance variations in the crankshaft, and the CKP sensor.

What does the PCM code on a Dodge mean?

Those manufacturers include but are not limited to Dodge, Chrysler, Ford, Jeep, Mazda, Mitsubishi, Kia, Isuzu, and Hyundai. This code is focused on the relationship between the crankshaft position sensor (CPS) and the engine controller (ECM/PCM). The PCM measures the variation between crankshaft position reference points.

What to do if your DTC P0300 code is P0300?

If DTC P0300 sets, follow DTC P0300 diagnostics in SI. The following tips may also be helpful: Isolate the cylinder or cylinders responsible for the P0300 misfire code and determine if the misfire can be moved to another cylinder by swapping components such as spark plugs, ignition coils and fuel injectors.