What are ribbon mics best used for?

What are ribbon mics best used for?

Ribbon mics are great for drum overheads, capturing cymbals without the tizzy hype. An R88 deployed at a reasonable distance on drum overheads delivers a beautiful stereo image of the entire drum kit that can be combined with a kick drum mic for a highly effective, minimalist drum kit recording technique.

What will happen if you provide a ribbon microphone with phantom power?

Intro. The ribbon elements in some vintage ribbon microphones can be harmed or even destroyed by the presence of phantom power. For this reason, it is commonly recommended that phantom power be turned off when using ribbon microphones. Leaving phantom power on can result in a stretched or completely blown ribbon.

Is a ribbon mic good for vocals?

Ribbon microphones usually give you the most accurate sound reproduction when compared with dynamic and condenser mics, but it comes at a cost… They are regarding for their accuracy and warmth, and work great for vocals, guitars, drums, horns, and more. …

Are ribbon mics sensitive?

Like their moving-coil dynamic counterparts, ribbon mics tend to lose sensitivity in the upper end. However, the ribbon is still sensitive to these high frequencies. The result is a natural-sounding roll-off of high-end rather than a sharp cut-off.

Does the Royer r10 require phantom power?

4. The R-10 requires no power supply and is safe to use on consoles with phantom microphone powering, provided that the cabling is wired properly.

Do Coles 4038 need phantom power?

2. NEVER PLUG THE 4038 INTO PHANTOM OR “T” POWERED MIC INPUTS. “T” POWER WILL INSTANTLY DESTROY A RIBBON (AND ALSO CAN HURT A DYNAMIC MIC). WHILE THE COLES 4038 CAN HANDLE VERY LOUD SOUNDS AT HIGHER FREQUENCIES, IT CAN BE DAMAGED BY STRONG AIR GUSTS.

Is a ribbon mic a condenser?

The main difference between ribbon and condenser mics is that ribbon mics convert sound via electromagnetic induction, and condensers do so via electrostatic principles. Ribbon mics have conductive ribbon-like diaphragms and simple circuitry, while condensers have active capsules and complex circuitry.