What is an SR meter?
Applications: Measurement of cold water where flow is in one direction; in residential, commercial and industrial services. Conformance To Standards: Sensus Sealed Register Water Meters comply with ANSI/AWWA Standard C700, latest revision. Each meter is tested to insure compliance.
How does a Sensus water meter work?
Sensus iPERL® smart water meters are designed to capture both lost water and lost revenue. The innovative magnetic technology delivers unmatched low flow registration and minimal pressure loss. The large, easy-to- read display includes AMI/AMR digits, direction of flow, units of measure, and empty pipe detection.
How do you read a Sensus 5/8 water Meter?
5/8” to 1” Sensus Iperl Meters The six wheels to the left of the decimal are measuring in cubic feet, and the three wheels to the right of the decimal will measure down to . 001 cubic feet. If you want to read in 100 cubic foot increments (Ccf), you would write down the first four (4) numbers from the left.
How do you read a Sensus meter?
The Sensus meter is read from left to right. The first 4 numbers are the 1000’s that we read (example – 699,000.0 gallons total went through this meter since it was installed). If the RED circle is moving, there is water currently flowing through the meter. The AMCO meter is read from left to right.
What is m2 measurement?
The square meter is the SI-derived unit of area. It has a symbol m² (33A1 in Unicode). It is defined as the area of a square whose sides measure exactly one metre. For example, a square that is 2 metres long and 2 metres wide has 4 square metres of area.
Can a Sensus water meter be installed vertically?
The innovative electromagnetic flow measurement technology of the ally meter allows enhanced accuracy ranges at both low and high flows and perpetual accuracy over the life of the product. It can be installed horizontally, vertically or diagonally.
What is m2 in square meter?
The square meter is the SI-derived unit of area. It has a symbol m² (33A1 in Unicode). It is defined as the area of a square whose sides measure exactly one metre.
Is m2 same as SQM?
A metre square is a square with sides one metre in length – it refers to the shape and the side length, not the area. By contrast, a square metre is an area and can be any shape….Updated 04/01/2020 (see below)
| Area= Length x Breadth | A=l × b |
|---|---|
| 2 metres x 2 metres | A = 2 m × 2 m |
| 4 square metres | A = 4 m2 |
What is the sensus Omni R2?
The Sensus Omni R2 are part of the Sensus smart-water network utility management solution to meet the evolving needs of water utilities offering remote system management options via their two-way communications architecture.
What is the sensus electronic register+™?
The Sensus® Electronic Register+™ is an advanced electronic register with 120 days of hourly data logging with 30-day data pull intervals available. The Electronic Register+ has several available smart alarms so you can get alerts and address issues before they become more costly.
What is the history of sensus water meters?
In 1957, Sensus, then known as Rockwell, revolutionized the waterworks indus- try with the introduction of the first magnetic drive water meter, the Sealed Register®(SR). Since 1957 the maincase design has remained constant allowing Sensus to easily upgrade their meters as technology has advanced.
What is SRSR II?
SR II meters integrate seamlessly with the FlexNet® communication network, offering water utilities a wide range of remote system management options via their two-way communication architecture. Now you can automate meter reading and a variety of field operations.