What is emc VNX?

Dell EMC VNX is a family of enterprise-grade unified file and block storage systems. The Dell EMC VNX family of storage systems combines data storage scalability and flexibility with industry-leading simplicity and efficiency, reducing the total costs of ownership and operation of the storage system.

What is control station in Vnx?

Control Station – CS – Normally preceded by “Primary” or “Secondary” as there are at least 1, but most often 2 control stations per VNX system. It is the job of the control station to handle management of the File or Unified components in a VNX system. Block only VNX arrays do not utilize a control station.

What is replication in Vnx?

The primary VNX replicates the data to the secondary VNX system; The secondary VNX acknowledges the write as complete back to the primary VNX; The primary VNX acknowledges the write as complete back to the host.

What is VNX5300?

VNX5300 Disk Processor Enclosure (DPE) is a high-performance unified storage system based on modular architecture that integrates hardware components for block, file, and object with concurrent support for native NAS, iSCSI, Fibre Channel, and FCoE protocols.

What is EMC VNX used for?

The VNX2 series utilizes EMC’s VNX Operating Environment for Block & File that you can manage with Unisphere, a simple, easy to use management framework. This VNX2 software environment offers significant advancements in efficiency, simplicity, and performance.

What is difference between VNX and VNXe?

The VNXe is built on a totally different Operating System than its “big brother” the VNX. One big difference is that while the VNX still uses vault drives to contain the operating system, five drives that are basically unusable for anything else, the VNXe has no such thing.

How do I access EMC VNX?

You can go via: the SP’s management port: http:// IP address>:9519; the SP’s service port: https://128.221.1.250:9519 (SP A) or https://128.221.1.251:9519 (SP B); and. the SP’s serial port: https://192.168.1.1:9519 (this assumes you’re connected via serial already – more on that below).

How do I access Vnx command line?

Instructions

1. Log into Unisphere.
2. Select the System tab.
3. Go to Control Station CLI at the bottom right pane.
4. Select Run Command right below that.
5. The command page opens for entering commands. Article Properties. Affected Product.

What is replication in EMC?

Replication between storage devices provides data redundancy and protects against storage system failures. Replication can be configured within the same system or to a different system locally, or in a remote location. All EMC Unity systems are licensed for replication as standard.

What is EMC RecoverPoint?

EMC RecoverPoint is a data protection solution that provides local, and remote continuous data protection, allowing for any point-in-time data recovery. In the event of data loss or corruption, data can be recovered across arrays and applications to a consistent state.

What is VNX unified storage?

Description. EMC VNX 5300 Unified Storage System is a high-performance platform for consolidating block storage, file servers, and any direct-attached application storage. The VNX operating environment allows Microsoft Windows, Linux, and UNIX clients to share data in multi-protocol environments (CIFS/NFS).

What is SPS in EMC storage?

EMC SPS Battery Standby Power Replacements.

How does Mirrorview traffic go through VNX?

All MirrorView traffic goes through one dedicated port of each connection type (FC or iSCSI) per Storage Processor. For VNX that have FC and iSCSI systems, one FC port and one iSCSI are available for MirrorView traffic (per SP). A path must exist between the MirrorView ports of SP-A of the primary and SP-A of a secondary system.

What is the EMC vnx5300?

Introduction to the EMC VNX Series 33 VNX5300 The VNX5300, the introductory model for the VNX unified platform, is designed for the mid-range entry space. This model provides either block and file services, file only services, or block only services, and uses a DPE.

What is EMC VNX series?

The VNX series is EMC’s next generation of midrange-to-enterprise products. The VNX series unifies EMC’s file-based and block-based offerings into a single product that you can manage with one easy to use GUI. This new VNX software environment offers significant advancements in efficiency, simplicity, and performance.

What is the VNX array fan-in ratio for Mirrorview?

It’s a common configuration when remote VNX Array is used for consolidated backups, simplified failover or consolidated remote processing activities. The 4:1 Fan-In ratio is applicable to both MirrorView/S and MirrorView/A