How do I fix a black iPhone screen after dropping it?

In many cases, your iPhone screen is black because the cable that connects the LCD to the logic board has become dislodged. This cable is called the display data connector. When the display data connector becomes dislodged from the logic board, your iPhone can be fixed by plugging it back in.

What happens when your iPhone screen goes black but still works?

If you’re stuck where the screen is black but the iPhone still works, a potential reason for this to be happening could be because of a software issue. This problem usually suggests that the iPhone is frozen or is crashing. Luckily what you can do here is reboot your device.

What to do if I drop my phone and the screen is messed up?

1 Answer

1. a) Go to settings in your phone and back-up all your information, using cloud provided.
2. b) Go to Factory Reset in your phone in the same menu in the settings menu, and choose how you want to reset.
3. c) Follow instructions on your phones screen.

Can a dropped iPhone be fixed?

Major Damage The worst case scenario is that the glass face shatters or the iPhone is damaged irreparably. If the iPhone is not working but the screen remains unbroken, Apple support technicians may be able to repair it or help you recover your data. Replacement screens are available, too.

Can you repair a dropped iPhone?

– Dropped My iPhone: Connect it to iTunes In the event that iTunes recognises your phone, back it up straight away. In the case that your iPhone develops a hardware fault such as a cracked screen, the only solution is to get it replaced. If your phone is under warranty, Apple will replace it.

Why is my screen black but my phone is on?

Plug in phone, wait five minutes, and then try to do a Force Restart. This ensure the phone has enough power to restart, and restarting could clear any errors that might be affecting the screen. If possible, remove the battery, wait 30 seconds or more, and then reinstall the battery and start your phone.

How do you fix a phone that fell and won’t turn on?

What to do if your phone won’t turn on

1. Restart the phone. The problem could be that your phone is frozen.
2. Charge the battery. Plugging in your phone for 15–25 minutes may do the trick.
3. Enable Safe Mode.
4. Check for damage.
5. Perform a factory reset.

How do I know if my iPhone is damaged?

You can tell if your iPhone has water damage by removing the SIM tray and looking for a red color inside the SIM card slot. If it’s red, that means the Liquid Contact Indicator (LCI) has been activated and there is water damage. It should appear white or silver if there is no damage.

Does your phone get damaged when you drop it?

Dropping your smartphone onto a hard surface can cause potentially devastating damage to the device’s internal components. Even if you escape the incident with a crack-free screen, you may have damaged the logic board, which has many different connectors and other components soldered to it.

How do you fix a black screen on an iPhone?

Hold the Home & Wake Buttons Press and hold the Lock/Wake button on the right side of your iPhone. Simultaneously, press and hold down the Volume Down button on the left side. Keep the Lock/Wake button pressed. Continue holding the buttons until the screen goes black and the Apple Logo is displayed.

Why does my iPhone 6 screen go black?

In many cases, your iPhone screen is black because the cable that connects the LCD to the logic board has become dislodged. This cable is called the display data connector. When the display data connector becomes dislodged from the logic board, your iPhone can be fixed by plugging it back in.

Why is my phone screen black?

The most common reason for a cellphone’s screen to go black is a simple hardware failure. This can be caused by the actual LCD going bad, by the cable that runs between the LCD and control board going bad, or even just from the cable’s connectors coming loose.