What is form factor size?
Form factor is used to describe the physical size and shape of a computer device measured by outside dimensions. It is most often used to describe the size of circuit boards, especially the motherboard and expansion cards.
What does ATX stand for group of answer choices?
What does ATX stand for? Advanced Technology Express. Many motherboards have a port for connecting to audio jacks on the front of the case, which is an example of a(n) _______________. front panel connector.
What are the usual dimensions of a microATX motherboard?
The maximum size of a microATX motherboard is 9.6 × 9.6 in (244 × 244 mm). However, there are examples of motherboards using microATX designation despite having a smaller size of 244 × 205 mm (9.6 × 8.1 in). The standard ATX size is 25% longer, at 12 × 9.6 in (305 × 244 mm).
What determines form factor?
The form factor design of hardware is dependent on, and influenced by, the form factor design of the components that go into the larger hardware unit. The size and the shape of the component are affected as are the connections and power specifications.
What size is small form factor?
A standard-size ATX desktop tower is usually around 40-45 liters. By comparison, a common measurement for SFF is around half of that — 25 liters or less.
What is the size of ATX motherboard?
305mm x 244mm
A full size ATX board is 12 inches wide by 9.6 inches deep (305mm x 244mm).
What is a form factor quizlet?
Form Factor. Specifies the physical dimensions of some of the components of a computer system. Specifies compatibility with the computer case and power supply. The form factor defines the size and layout of components on the motherboard. It also specifies the power outputs form the power supply to the motherboard.
What are the dimensions of an ATX motherboard?
A full size ATX board is 12 inches wide by 9.6 inches deep (305mm x 244mm). The Mini-ATX board is 11.2” x 8.2” (284mm x 208mm).
Is Mini ATX the same as micro-ATX?
As you can see, mATX motherboards are the same width as standard ATX motherboards, but they are a couple of inches shorter. Mini-ITX motherboards, on the other hand, are shorter in both height and width than micro-ATX motherboards. They typically only feature a single PCIe lane.
What is large form factor?
The most common form factors for HDDs in enterprise systems are 2.5-inch, also known as small form factor (SFF), and 3.5-inch, also known as large form factor (LFF). The 2.5-inch and 3.5-inch measurements represent the approximate diameter of the platter within the drive enclosures.
What are the dimensions of an ATX case?
12 by 9.6 inches
ATX, MicroATX, and Mini-ITX PC cases themselves are often referred to by these three form factors, but the terms more accurately refer to the size of the motherboards they can host. ATX boards measure 12 by 9.6 inches, MicroATX up to 9.6 by 9.6 inches (they’re sometimes smaller), and Mini-ITX 6.7 inches square.
What is ATX form factor used for?
ATX form factor. The ATX form factor is a replacement for the older AT and baby AT form factors. Invented by Intel in 1995, it incorporates the first major change in the layout of PC motherboards to occur in years. The ATX motherboard rotates the orientation of the board 90 degrees.
What is the form factor?
Form factor refers to the physical size and shape (according to outside dimensions) of a computer device. It is most often used to describe the size of circuit boards, especially the motherboard and expansion cards.
What is a standard ATX motherboard?
Standard ATX is the most common form factor, particularly on a desktop computer. A standard ATX motherboard supports state-of-the-art graphic cards and has several expansion slots for RAM.
What is a thin form factor power supply?
Thin Form Factor is another small power supply design with standard ATX specification connectors. Generally dimensioned (W × H × D): 85 × 64 × 175 mm (3.34 × 2.52 × 6.89 in). Provides a WTX style motherboard connector which is incompatible with the standard ATX motherboard connector.