How do I reset my KitchenAid dishwasher?

KitchenAid Dishwasher Cycle Reset

1. Press and hold the Cancel or Cancel Drain Button for 3-5 seconds.
2. It will cancel and reset KitchenAid dishwasher.

Why won’t my KitchenAid dishwasher light up?

If the indicator lights on your dishwasher won’t light at all, the first thing to check is the electricity. Make sure the power is on and the dishwasher is plugged into a working outlet and the fuse or circuit breaker isn’t blown or tripped.

How long should a KitchenAid dishwasher last?

10 years
How long do KitchenAid Dishwashers last? A dishwasher has an average lifespan of seven to 12 years. In our experience, KitchenAid dishwashers can last for as long as 10 years with proper maintenance and care.

How do I put my KitchenAid dishwasher in diagnostic mode?

To invoke a Diagnostics Cycle, press the “Heated Dry” key followed by the “Normal” key then again the “Heated Dry” key and finally “Normal” key, once more. Ensure your machine is in standby mode while doing it (and press the keys rapidly).

Do KitchenAid dishwashers have a reset button?

When you run into trouble with your KitchenAid or Whirlpool dishwasher, one of the first steps to troubleshoot the problem is to reset the appliance. Sadly, there is no single ‘RESET’ button for you to push. Instead, you’ll be pressing some of the other buttons in what’s known as a reset sequence.

Why is the clean light blinking on my KitchenAid dishwasher?

The Clean light is an indication that the dishwasher has been run and the dishes inside it are clean. Once the door is opened after the cycle is complete, the light will shut off.

What would cause a dishwasher to not turn on?

If your dishwasher won’t start, the problem could be the door latch or door latch switches. If the door cannot close properly to activate the door latch switches or if the switches are defective, then the dishwasher controls will not receive power and the dishwasher will not start.