What is the difference between IEC C13 and C14?

C13 connectors offered by Interpower are rated at 10A/250VAC international and 15A/250VAC North America with a temperature rating of up to 70°C. C14 inlets are also rated at 10A/250VAC international and 15A/250VAC North America with a temperature rating of up to 70°C.

What does IEC cable stand for?

The International Electrotechnical Commission
The International Electrotechnical Commission, commonly known as the IEC, is the world’s leading independent non-profit international standard-setting organisation for electrical, electronic and related technologies.

What is the difference between C14 and C15?

C13 and C14 power cords are usually utilized with personal computer. C15 power cords are used in high temperature surroundings like electric kettle and computer networking closet. They are also used in Cisco MDS9500 series rack-mounted SAN switches, Early Xbox 360 power supplies and HP Procurve Switches.

What is IEC C20?

IEC C20 to C19 power cord allows you to connect your computer to a server. The IEC C19 connector mates with a C20, typically found on computer and network equipment power supplies. These C20 to C19 cords are 20A, 250V. IEC C20 plug to C19 connectors.

What uses IEC power cord?

NEMA and IEC are the two most common standards for power cords used in North America. NEMA connectors are on the side of the power cord that plugs into an AC wall outlet. IEC connectors are the side that plugs into devices like computers or TVs.

Are all IEC power cables the same?

We often find that people are unsure of the difference between mains power cables, or what the IEC standards are. There are 12 IEC connectors by shape; each has a different name for the Male or Female side. For example C7 is male and C8 is female, but both have the same shape connector.

What are C14 and C15 power cord?

Molded C14 to C15 Power cord. Male end has an C14 plug, female end has a C15 connector. Cable uses a heavy duty 14 AWG jacket, and is rated for 15 amps and 250V. Used to connect server and networking equipment to a power strip in a data rack.

What is C14 C15 power cables?

C14 to C15 cables allow you to plug a network device into an IEC320 C13 receptacle. C14 to C15 cables allow you to plug a network device into an IEC320 C13 receptacle. Blue C14 / C15 cords allow you to distinguish various cable paths in a rack while keeping visuals neat and organized.

What does a C20 plug into?

IEC320 C20 Male Plug to NEMA L6-30 Connector 0.3 meters / 1 foot 20A/250V 12/3 SJT Black – Pigtail Plug Adapter. Adapt a NEMA L6-30 Male Plug (30 Amp 250 Volt twist lock blade) to fit into a C19 female outlet. Make sure the equipment will operate at the supplied voltage to avoid damage.

What is a IEC 60320 C14?

IEC 60320 C14 Connector (Male) The IEC 60320 C14 is a grounded 3 Wire Plug rated up to 250V and 15 Amps. The C14 mates with a C13 outlet, typically found on Data Center/IT specific PDUs (Power Distribution Unit). The most common configuration for a C14 is in a jumper cable scenario,…

What is the difference between IEC 320 and IEC 60309 connectors?

Unlike IEC 60309 connectors, they are not coded for voltage; users must ensure that the voltage rating of the equipment is compatible with the mains supply . The first edition of IEC 320 (later renumbered IEC 60320) was published in 1970.

What is a 60320 C13 connector?

IEC 60320 C13 Connector (Female) The IEC 60320 C13 is a grounded 3 Wire connector rated up to 250V and 15 Amps. The C13 mates with a C14 inlet, and is commonly used in a jumper cable scenario in IT Installations providing power from a PDU to a server, router, switch or other computing device.

What is iec320 C14 power cord plug connector?

Toptekits IEC320 C14 Power Cord Plug Connector.This easy-to-wire connectors allows you to make your own IEC cable connections without soldering. Power Supply: AC 250V 10A ,Cable Diameter: up to 8mm OD New (3) from $7.99 FREE Shipping on orders over $25.00 shipped by Amazon. .