How do you use a staples heavy duty stapler?

Loading Instructions: Heavy Duty Stapler

1. Place stapler on a flat surface.
2. Pull the stapler slide mechanism out of the back of the stapler so there is room to insert the staples.
3. Insert the staples onto the stapler slide.
4. Reinsert the slide mechanism back into the stapler slide.

How do you open Q Connect heavy duty stapler?

On the back the metal piece pushes in slightly. If you push it in (and down) then lift the back opens up to add staples. Put them in slide it closed opposite way to open it.

How do you properly staple?

The Correct way: The staple needs to be in the upper, left- hand corner, parallel to the left edge. Side of page staple – CORRECT! This method of stapling papers together allows pages to be turned, and flow, like the pages of a bound book: along the “spine” of the stack.

How do you set up a stapler?

Insert the recommended staples, placing the pointy legs first into the staple tray. To close top load staplers, push the top of the stapler down until it clicks into place. For back load staplers, push the stapler tray in to close it.

What is a heavy duty stapler?

DURABLE HEAVY DUTY STAPLER – Strong stapler is designed for long-lasting service, with all-metal construction. SECURES 160 SHEETS – Heavy duty stapler is designed to cover your high-volume stapling needs, securely fastening an impressive 160 sheets.

How do I Fix my Swingline stapler?

Pull them apart until you can see the inside of the stapler. Move all of the good staples that you can grab back from the head of the stapler and remove them temporarily. Use your tweezers to pull as many of the staples from the front of the stapler out as possible.

How to load a Swingline stapler?

– Load the Swingline staple gun by removing the spring loaded push bar located on the back of the stapler’s handle. – Press the stapler against the surface that is to be stapled. – Depress the handle trigger to actuate the stapler.

How do you fix a heavy duty stapler?

If you have a heavy-duty stapler (the ones that are used to attach pictures and wires to hard surfaces) the staples are longer and more difficult to remove when lodged into the stapler head. First pull out the spring assembly. Use a pair of needle-nosed pliers to pull the jammed staples out of the head of the stapler.