How wide is a Ram truck bed with RAM boxes?
Whether you purchase the 2020 RAM 1500 Classic Tradesman or the 2020 RAM 1500 Laramie, your bed width will be a standard 4’25” from left to right. Beyond width, RAM 1500 trucks are available with three box lengths. You can purchase trims with box dimensions of 5’7”, 6’4”, and an extended 8”.
What does RamBox cargo management system include?
The RamBox Cargo Management System comes with built-in cargo rails, sliding tie-down cleats and top rail covers. There are hundreds of uses for the multi-position box divider that doubles as a box extender.
How wide is inside of RAM box?
There are two RAM bed sizes for the new Ram 1500, but all beds are 66.4 inches wide and 21.5 inches deep.
How wide is a Ram 2500 bed with RamBox?
66.4 inches
Ram 2500 Bed Options This box is 20.2 inches in depth, 98.3 inches in length, and 66.4 inches in width from bed wall to bed wall. With these spacious bed dimensions, you’ll have a whopping 74.7 total cubic feet of cargo volume to work with in the back.
How are truck beds measured?
The length of a truck bed is determined by the distance between the inside of the bulkhead and the inside of your tailgate. Have your tape measure on hand and make sure your tailgate is up. Then, position the tape measure so that it fits in between the inside of the bulkhead and the inside of your tailgate.
Can you get RAM boxes on a long bed?
When you opt for a RAM model with a RamBox, you’re getting a large truck bed with an additional storage unit that functions like the trunk of a sedan. It’s the best of both worlds and can be found on the following RAM truck models: RAM 1500. RAM 1500 Crew Cab.
How are Dodge Ram beds measured?
How To Measure Your Truck Bed
- Place your measuring tape at the bulkhead of your truck bed.
- Moving along your bed rail, extend the measuring tape to the inside edge of the top of your tailgate. Record the measurement in inches.
- Divide the number of inches by 12 to determine the length of your truck bed in feet.
How long is a Ram 2500 Crew Cab with 8 foot bed?
Tradesman 4×4 Crew Cab 8 ft. box 169 in. WB 2020 RAM 2500 Specs
| Exterior | |
|---|---|
| Length | 260.8 “ |
| Body width | 79.4 “ |
| Body height | 80.1 “ |
| Wheelbase | 169.0 “ |
How do I measure my bed size?
To determine the dimensions of a mattress, measure it from head to foot for the length and from side to side for the width. It may be helpful to measure the depth of the mattress as well, from the bottom where it rests on the box spring to the top.
Can you tell truck bed size by VIN number?
By entering the VIN, a dealer can get a build sheet, which is a printout of how the car is equipped. That includes engine size, transmission, bed size, interior specifications and even factory options.
What is the Dodge Ram cargo management system?
The RamBox Cargo Management System is a secure storage compartment that can be built into the side rails of your light-duty or heavy-duty truck. Durable and efficient, this system allows truck owners to have an additional place to stow tools and other items.
What is truck cargo management system?
The Cargo Management System is a track that runs at the top of the bed, just under the rails. In some cases, there may be a rail at the bottom of the bed, although this rail wouldn’t affect a tonneau cover installation. Cargo Management Systems are an innovative way to load and store heavy and/or bulky cargo.
What is a Rambox Dodge?
“RamBox is a unique, segment-exclusive cargo management system that includes four key elements: Two weatherproof, lockable, drainable, lighted storage bins that run the length of the 5-foot-7-inch pickup bed, and are as wide as the wheel well, creating a total of 8.6 cubic feet of space; Configurable bed dividers;